Two-Phase Pressure Drop and Flow Regime of Refrigerants and Refrigerant -Oil Mixtures in Small Channels
Field, Brandon S.
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/83882
Description
Title
Two-Phase Pressure Drop and Flow Regime of Refrigerants and Refrigerant -Oil Mixtures in Small Channels
Author(s)
Field, Brandon S.
Issue Date
2007
Doctoral Committee Chair(s)
Predrag Hrnjak
Department of Study
Mechanical Engineering
Discipline
Mechanical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Mechanical
Language
eng
Abstract
As microchannel heat exchangers have become more sophisticated in their design, more exact understanding of the flow inside them is necessary. A decrease in diameter enhances the heat transfer (which takes place at the inner walls of the tubes), but also increases the pressure drop (as the diameter decreases, it becomes like drinking a milkshake through a coffee stirrer). The inclusion of even small amounts of oil in circulation can have a significant effect as well. Historical correlations and studies of two-phase flow have been shown to be insufficient for predicting pressure drops in the smaller channels, due to the different fluid physics that are relevant in flows of small diameter. This study is aimed at understanding the fluid property effects that contribute to pressure drop and flow regime. Two-phase pressure drop data for four refrigerants (R134a, R410A, R290 and R717) were measured in a channel with hydraulic diameter of 148 mum. These data were combined with previous two-phase data of R134a in small channels (hydraulic diameters ranging from 70 to 300 mum) to generate a separated flow model that spans a wide variety of fluid properties. Refrigerant was then mixed with two different viscosities of oil at concentrations ranging from 0.5 to 5% oil, and two-phase pressure drop measurements were taken of those mixtures. Flow visualizations of three of these refrigerants (R134a, R290 and R717) and several concentrations of a R134a-oil mixture were made in a channel with 500 mum hydraulic diameter, and flow regime classifications and comparisons with previous flow maps were made. Finally, a mechanistic description of the two-phase flow that occurs in small channels is put forth, based on the pressure drop measurements and the flow visualizations.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
