Characterization of Two -Phase Flow in Microchannels
Nino, Victor German
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/83776
Description
Title
Characterization of Two -Phase Flow in Microchannels
Author(s)
Nino, Victor German
Issue Date
2002
Doctoral Committee Chair(s)
Hrnjak, Predrag S.
Newell, Ty A.
Department of Study
Mechanical Engineering
Discipline
Mechanical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Mechanical
Language
eng
Abstract
Aluminum multi-port microchannel tubes are currently utilized in automotive air conditioners for refrigerant condensation. Recent research activities are directed toward developing other air conditioning and refrigeration systems with microchannel condensers and evaporators. Three parameters are necessary to analyze a heat exchanger performance: heat transfer, pressure drop, and void fraction. The purpose of this investigation is the experimental investigation of void fraction and frictional pressure drop in microchannels. A flow visualization analysis is another important goal for two-phase flow behavior understanding and experimental analysis. Experiments were performed with a 6-port and a 14-port microchannel with hydraulic diameters of 1.54 mm and 1.02 mm, respectively. Mass fluxes from 50 to 300 kg/s.m2 (range of most typical automotive applications) are operated, with quality ranging from 0% to 100% for two-phase flow experiments. R410A, R134a, and air-water mixtures are used as primary fluids. The results from the flow visualization studies indicate that several flow configurations may exist in multi-port microchannel tubes at the same time while constant mass flux and quality flow conditions are maintained. Flow mapping of the fluid regimes is accomplished by developing functions that describe the fraction of time or the probability that the fluid exists in an observed flow configuration. Experimental analysis and flow observations suggest that pressure drop and void fraction in microchannel is dependent on the most probable flow regime at which the two-phase mixture is flowing. In general, correlations for void fraction and pressure drop predictions are based in a separated flow model and do not predict the experimental results in the range of conditions investigated. A flow regime based model is developed for pressure drop and void fraction predictions in microchannels.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
