Length-Scale Effects on Nano-Scale Materials Behavior
Haque, Md. Amanul
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/83775
Description
Title
Length-Scale Effects on Nano-Scale Materials Behavior
Author(s)
Haque, Md. Amanul
Issue Date
2002
Doctoral Committee Chair(s)
Muhammed Taher Abu Saif
Department of Study
Mechanical Engineering
Discipline
Mechanical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Materials Science
Language
eng
Abstract
For the first time, we have performed in-situ, quantitative tests on 100 nm thick aluminum films in TEM. We also have performed tensile (both low and high temperature) and bending tests on 30--485 nm thick aluminum and 75--350 nm thick gold specimens. Followings are the observations of this study. (1) The Young's modulus of aluminum deviates from the bulk values for average grain size below 50 nm (70 nm for Gold). For the first time, we observe strong non-linear elastic behavior for grain sizes below 20 nm. (2) Texture and anelastic effects cannot explain the elastic behavior at the nano-scale and we propose a mechanism based atomic-scale interactions. (3) In-situ TEM tests show that below a transitional length-scale (50 nm grain size for aluminum), dislocations cease to exist in the grain interiors. Absence of both dislocation and diffusion-based deformation mechanisms, and the increasing influence of the native oxide give rise to the resemblance to the reverse Hall-Petch behavior. (4) For the first time, we observe absence of permanent strain hardening in aluminum for grain sizes below 50 nm. We propose that this is due to the absence of dislocations at interior of grains at this length-scale. (5) For the first time, we observe grain size dependence of the strain gradient plasticity in aluminum. For grain sizes below 50 nm, the absence of dislocations results in no appreciable strain gradient strengthening. However, as the grain size increases, dislocations appear to dominate deformation characteristics, and strong strain gradient effects are observed. The characteristic length scale for aluminum is found to be about 4 microns.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
