An Improved Prescribed Wake Analysis for Wind Turbine Rotors
Fisichella, Christopher Joseph
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/83752
Description
Title
An Improved Prescribed Wake Analysis for Wind Turbine Rotors
Author(s)
Fisichella, Christopher Joseph
Issue Date
2001
Doctoral Committee Chair(s)
Newell, Ty A.
Department of Study
Mechanical Engineering
Discipline
Mechanical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Energy
Language
eng
Abstract
The trajectories of the tip vortices of a model wind turbine rotor are quantitatively tracked for twenty-seven separate test conditions. Three pitch angles are used (-8°, -3° and 3°). Three tip speed ratios are examined (2, 5 and 10). Finally, data for rotors with one, two and three blades are presented. The pitch of the ensuing helical wake is found to be modeled well by the reciprocal of the rotor tip speed ratio. The radial locations of the tip vortices stay relatively constant at 97% radius. The exception to this is when the rotor is operating under a high thrust loading condition. The tip vortices will then propagate radially at a rate equal to 0.024 nondimensional radial units per radian of rotation until the following blade passes. At that time, the rate decreases to 0.010. Three tests were used to determine the axial settling of the inboard sheet. It is found to be approximately modeled by the tip vortex axial settling rate. The empirical wake settling data from this investigation are programmed into an existing prescribed wake/thin lifting surface computer program. When comparing thrust predictions with measured values, the codes generally agree within 5% for moderate tip speed ratios. The revised code tends to predict less thrust. The time for calculations has been reduced by 40%. The code is also much more stable. An extensive set of three component hot film measurements was collected. In addition to being a valuable resource for modelers, the data set helped show the superior flow field predicting capabilities of the revised code. Velocity profiles near a tip vortex are contained in the data set and show strong induced velocities in the axial, radial and tangential directions.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
