Development of a New Ring Shear Apparatus for Investigating the Critical State of Sands
Sadrekarimi, Abouzar
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/72185
Description
Title
Development of a New Ring Shear Apparatus for Investigating the Critical State of Sands
Author(s)
Sadrekarimi, Abouzar
Issue Date
2009
Doctoral Committee Chair(s)
Olson, Scott,
Department of Study
Civil Engineering
Discipline
Civil Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Geotechnology
Engineering, Civil
Abstract
The present study investigates the shearing behavior of sands pertinent to liquefaction and critical state soil mechanics using an improved ring shear apparatus designed and constructed at the University of Illinois. Undrained/constant volume and drained triaxial compression and ring shear tests (sheared to about 30 m of shear displacement) were performed on two clean sands and one silty sand. Shear displacements localized when the peak friction angle was mobilized and subsequent shear displacements occur only within the shear band which was (10--14)xD50 thick. Considerable particle damage and crushing was observed within the shear band, particularly for dilative specimens, which led to volumetric contraction in the shear band. The critical state line (corresponding to the critical state after particle damage and crushing was complete) was much steeper and plotted below conventional critical state lines in e -- log sigma' space measured using triaxial tests. Both dense and loose sands reached this final state. Accordingly, two definitions of critical state of sands with and without particle damage are proposed.
The critical state friction angle from the ring shear tests was independent of the initial sand fabric and decreased only slightly with stress level, becoming essentially constant at stresses larger than 100--200 kPa. Particle crushing induced in the ring shear tests increased the critical state friction angle by a few degrees by producing a wider grain size distribution and more angular particles. However, because some of the triaxial specimens likely did not reach a critical state, the mobilized friction angle from triaxial tests was influenced by the initial fabric of the sand.
A constant critical shear strength was achieved at very large shear displacements (>750 cm) in the ring shear tests, and before this the shear resistance of sands was dependent on the amount of shear displacement and particle crushing. Yield strength ratios of contractive specimens ranged from 0.15 to 0.31, while the critical strength ratios of both contractive and dilative specimens decreased from a range of 0.04--0.21 (for the original sand) to 0.01--0.07 (for the crushed sand).
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
