Combustion of Coal Dust-Air Mixtures (Flammability, Radiation, Volatile)
Slezak, Scott Edward
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/70120
Description
Title
Combustion of Coal Dust-Air Mixtures (Flammability, Radiation, Volatile)
Author(s)
Slezak, Scott Edward
Issue Date
1984
Department of Study
Mechanical Engineering
Discipline
Mechanical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Mechanical
Abstract
Coal dust flammability studies are essential in order to evaluate propagation limit concentrations and the fundamental burning velocity as a function of dust concentration. This work presents such data for Pittsburgh seam bituminous coal dust using a relatively large scale horizontal flammability apparatus, the Gravity Tumbler Flammability Tube (GTFT). The reported lean limit (based on propagating a steady-state constant pressure flame) was measured as 0.42 kg/m('3), a factor of two or three greater than that reported from the modified Hartmann bomb apparatus. A maximum steady-state flame speed was measured as 34 cm/sec, at a concentration of 0.9 kg/m('3), a value greater than that observed when studying similar dusts with held flame facilities. Consistent indirect evidence was observed to indicate a rich flammability limit of 1.5 kg/m('3), but this could not be conclusively proven with the GTFT facility.
A combustion model describing the fundamental coal dust flame propagation phenomena was also developed in this work. The model includes heterogeneous combustion, pyrolysis of the coal, and homogeneous combustion of volatile matter. Molecular diffusion, conduction, and the optically thick limit for radiation heat transfer were also included in the model. Coal (fuel) rich mixtures in air were considered for equivalence ratios of 3 to 8. Predicted burning velocities for 50 (mu)m particles of coal with 36% volatile matter indicated a broad maximum of 37 cm/s at an equivalence ratio of 4 (0.367 kg/m('3)). The minimum computed velocity was 21 cm/s at (phi) = 8 (0.733 kg/m('3)). The burning velocity was found to increase somewhat as the particle size decreased. The chemical kinetics model was highly simplified, but based on experimental information. The predicted flame temperatures and structures compared well with experimental data. The structure of the flames were found to be strongly influenced by radiative heat transfer. Flame thicknesses were about 10 cm.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
