Process Engineering Characteristics of the Hollow Fiber Ultrafiltration of Skimmilk
Chiang, Been-Huang
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/70072
Description
Title
Process Engineering Characteristics of the Hollow Fiber Ultrafiltration of Skimmilk
Author(s)
Chiang, Been-Huang
Issue Date
1983
Department of Study
Food Science
Discipline
Food Science
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Agriculture, Food Science and Technology
Engineering, General
Abstract
Performance and mass-transfer characteristics of the ultrafiltration of skimmilk was studied using a pilot-scale hollow fiber membrane unit. The independent variables were transmembrane pressure, flow rate, temperature and feed concentration and the major measured variable was permeate flux (J). Physical properties such as density, viscosity and protein content of the retentate were experimentally determined while diffusivity was estimated from literature values. The dependence of physical properties of the ultrafiltered skimmilk on temperature and concentration were usually nonlinear, largely due to hydration effect and the interactions between protein molecules. The effect of processing factors on ultrafiltration flux were closely related to the degree of concentration polarization. No single property could fully account for the variation of processing performance at various process conditions.
The pressure-independent, mass-transfer limited region was modelled on the popular "gel-polarization" film theory. Assuming a linear dependence of diffusivity on feed concentration in the boundary layer, the following form of the model was derived: J = Ks ln (Cg/Cb) + (PHI) Ks (Cg - Cb), Where Ks is mass-transfer coefficient, Cg is protein concentration at the membrane surface, Cb is bulk solution protein concentration and (phi) is a factor describing the effect of protein concentration on diffusivity. The mass-transfer coefficient was obtained from the dimensionless correlation: Sh = A Re('(alpha)) Sc('(beta)). The parameters in these models were determined by nonlinear model fitting method of Marquardt. The final values of the parameters were: A = 0.087, (alpha) = 0.636, (beta) = 0.333, (phi) = 0.1571, Cg = 20.41.
The second model developed in this study was based on the resistance concept. The two major resistances were assumed to be due to (1) the membrane plus any adsorbed layer (Rem) and (2) the combined resistance due to the "gel" and boundary layers, which was assumed to be a function of pressure. The final form of the model wa J = (DELTA)P(,T)/(Rem + K (DELTA)P(,T)), where K was found to be a function of flow rate and feed concentration, but not significantly affected by temperature. Rem was a constant. This resistance model was found to fit the data quite well over most of the experimental values.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
