Modeling and Analysis of Plasma-Assisted Etching Reactor Phenomena
Economou, Demetre John
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/69791
Description
Title
Modeling and Analysis of Plasma-Assisted Etching Reactor Phenomena
Author(s)
Economou, Demetre John
Issue Date
1988
Doctoral Committee Chair(s)
Alkire, Richard C.
Department of Study
Chemical Engineering
Discipline
Chemical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Chemical
Abstract
Mathematical models were developed in order to analyze the effect of plasma reactor operating conditions on phenomena controlling etch rate, degree of anisotropy and uniformity of etching thin films. The shape evolution of a microscopic cavity was simulated using Boundary Element methods and a moving boundary scheme. Gas-phase ion scattering and ion defocusing owing to local, lateral electric field forces in the near-cavity region, resulted in loss of etch anisotropy even in the absence of chemical (spontaneous) etching. The formation of curved trench sidewalls was accompanied by a decrease in etch rate as a function of trench depth. Both phenomena can cause problems in deep trench etching applications. A macroscopic plasma reactor engineering model was then formulated. The unique feature of the model was that explicit account was taken for the ion-assisted component of etching, by considering the ion transport in the sheath as an integral part of the model. Convective-diffusion and chemical reactions of the etchant species were also included as well as the state of the plasma, for the case of the oxygen discharge. Important dimensionless system parameters were identified and their effect on etch rate, degree of etch anisotropy and uniformity was examined. The model predictions agreed with experimental data on etch rate of photoresist in an oxygen plasma as a function of pressure, power, and flow rate. Experimentally observed changes in uniformity patterns with flow rate were also predicted by the model.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
