Highly sensitive strain gauge based entirely on elastomers via molding process

Lu, Chi

Permalink

https://hdl.handle.net/2142/31910 Copy

Description

Title

Highly sensitive strain gauge based entirely on elastomers via molding process

Author(s)

Lu, Chi

Issue Date

2012-06-27T21:00:31Z

Director of Research (if dissertation) or Advisor (if thesis)

Rogers, John A.

Department of Study

Materials Science & Engineerng

Discipline

Materials Science & Engr

Degree Granting Institution

University of Illinois at Urbana-Champaign

Degree Name

M.S.

Degree Level

Thesis

Keyword(s)

• Strain Gauges
• Hignly Sensitive
• Elastomer
• Molding Process

Abstract

This thesis is mainly about the research on highly sensitive strain gauges based entirely on elastomers and partially about the molding process which is used to fabricate the strain gauge and pattern poly-dimethylsiloxane (PDMS). In this thesis, I demonstrate the design, fabrication and characterization of high gauge factor (GF), all-elastomer strain gauge systems, with Young’s modulus of 224 kPa, which lies within the range of the human epidermis. The devices combine carbon black doped-PDMS resistors, carbon nanotube doped-PDMS conductors and an insulating PDMS matrix/substrate to yield, in mechanically optimized geometrical layouts, desired characteristics. Measurement of strains in human skin using sensor sheets of this type, physically laminated onto the wrist, illustrates a representative implementation. Strains measured in this mode on the wrist are between 11.2% and 22.6%. Such sheets can be readily laminated on and form conformal contact to the human skin, with only modest mechanical constraints on natural motions. Moreover, the devices remain attached even under full-range bending of the joint, with minimal effects of mechanical constraint or mass loading. The approach I used to pattern the conductive PDMS is molding and scrapping. Molding process can not only be used to pattern conductive PDMS but also regular PDMS. For example, skin-like PDMS sheet with an array of hollows will be discussed later in the thesis.

Graduation Semester

2012-05

Permalink

http://hdl.handle.net/2142/31910

Copyright and License Information

Copy Right 2012 Chi Lu

Owning Collections