An experimental study of heated jets in a cross-flow from stacks of various geometries

Johnson, Blake

Permalink

https://hdl.handle.net/2142/31119 Copy

Description

Title

An experimental study of heated jets in a cross-flow from stacks of various geometries

Author(s)

Johnson, Blake

Issue Date

2012-05-22T00:29:21Z

Director of Research (if dissertation) or Advisor (if thesis)

• Christensen, Kenneth T.
• Elliott, Gregory S.

Doctoral Committee Chair(s)

Christensen, Kenneth T.

Committee Member(s)

• Elliott, Gregory S.
• Bodony, Daniel J.
• Vanka, Surya Pratap

Department of Study

Mechanical Sci & Engineering

Discipline

Theoretical & Applied Mechans

Degree Granting Institution

University of Illinois at Urbana-Champaign

Degree Name

Ph.D.

Degree Level

Dissertation

Date of Ingest

2012-05-22T00:29:21Z

Keyword(s)

• Jets
• Jets in Cross-Flow
• particle image velocimetry (PIV)
• Proper Orthogonal Decomposition (POD)
• Turbulence

Abstract

Heated jets in cross-flow (JICFs) occur in a wide variety of situations in engineering practice and the natural environment. Because many industrial and environmental JICFs involve raised-stack emission, non-circular mouths under the influence of shifting winds, and oftentimes strongly heated jet fluid, there is a need for further investigation into the effects that such influences have upon the jet development. Two-dimensional particle image velocimetry (PIV) measurements are performed in the plane of symmetry aligned with the cross-flow of the near-field of the jet while stereoscopic PIV (sPIV) measurements are made in the spanwise--wall-normal plane at three far-field cross-sections downstream of a raised jet stack. Temperature measurements are also made in the same planes as the sPIV measurements. The raised jet is set at such a height that it emits into a uniform free-stream environment free of the boundary-layer effects that impact jets that exit flush with the boundary. Heated jets are studied that emit at centerline temperatures T0 significantly higher than ambient temperature T1, achieving temperature ratios T0/T1 of 1.4 and 2. Measurements are also made of two unheated JICFs at approximately the same Reynolds numbers Re0 = V0D/v0 and Re1=U1D/v1, respectively, of the heated jet, all at blowing ratio r0 = 4.5. The flow from rectangular stacks of varying aspect ratio and orientation relative to the cross-flow is compared to that of a circular JICF. Interacting JICFs from arrays of rectangular stacks are also investigated. Proper orthogonal decomposition is applied to the PIV data to explore structural differences and any redistribution of Reynolds stress arising in the heated JICF vs. that of the unheated cases.

Graduation Semester

2012-05

Permalink

http://hdl.handle.net/2142/31119

Copyright and License Information

"Copyright 2012 Blake Everett Johnson. All rights reserved. NAVAIR Public Release 2012-343 Distribution Statement A - ""Approved for public release; distribution unlimited"""

Owning Collections