Voltage-Offset Resistive Control for Photovoltaics

Kim, Katherine

Permalink

https://hdl.handle.net/2142/29691 Copy

Description

Title

Voltage-Offset Resistive Control for Photovoltaics

Author(s)

Kim, Katherine

Issue Date

2012-02-06T20:11:23Z

Director of Research (if dissertation) or Advisor (if thesis)

Krein, Philip T.

Department of Study

Electrical & Computer Eng

Discipline

Electrical & Computer Engr

Degree Granting Institution

University of Illinois at Urbana-Champaign

Degree Name

M.S.

Degree Level

Thesis

Keyword(s)

• voltage-offset resistive control
• photovoltaics
• power electronics
• dc-dc converter control
• maximum power point tracking
• irradiance sensitivity
• direct current (dc)

Abstract

This thesis introduces voltage-offset resistive control (VRC) for photovoltaic (PV) applications that exhibits low sensitivity to solar irradiance changes. Although there are numerous control schemes and maximum power point tracking (MPPT) methods for PVs, few focus on maintaining low sensitivity to irradiance transients. Daily PV electrical characteristics are observed to identify trends in the maximum power point (MPP) movement. Analysis shows that VRC has inherently low sensitivity to irradiance changes and is an effective inner-loop control method to maintain operation at the MPP. For the buck and boost dc-dc converter, simple control equations that represent the ideal VRC equilibrium are examined for stability. Small- and large-signal analyses show that one control equation for the boost converter is stable over the intended operation range—with some limitations based on component values. VRC is implemented using a digital controller on a boost converter PV module. Steady-state stability is verified, and irradiance and control parameter step responses are observed through simulated and experimental results. VRC exhibits stability and fast transient response; it is promising as an effective inner-loop control scheme. A number of MPPT methods that utilize VRC for low irradiance sensitivity are introduced. These methods take measurements and adjust the control periodically; control parameters are held constant between measurements. This sample-and-hold control approach reduces controller computation requirements and power consumption. Traditional and VRC MPPT methods that utilize sample-and-hold operation are compared through simulation. The fractional open-circuit voltage VRC and MPP-current-based VRC methods are identified as effective and simple control solutions for PV systems that maintain high efficiency under irradiance transients.

Graduation Semester

2011-12

Permalink

http://hdl.handle.net/2142/29691

Copyright and License Information

Copyright 2011 Katherine A. Kim

Owning Collections