X-ray scattering and lattice dynamics studies for impurity effects on the para-to-ferroelectric phase transformation behavior in lead titanate and barium titanate
Takesue, Naohisa
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/22965
Description
Title
X-ray scattering and lattice dynamics studies for impurity effects on the para-to-ferroelectric phase transformation behavior in lead titanate and barium titanate
Author(s)
Takesue, Naohisa
Issue Date
1996
Doctoral Committee Chair(s)
Chen, Haydn
Department of Study
Chemistry, Physical
Physics, Condensed Matter
Engineering, Materials Science
Discipline
Chemistry, Physical
Physics, Condensed Matter
Engineering, Materials Science
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Chemistry, Physical
Physics, Condensed Matter
Engineering, Materials Science
Language
eng
Abstract
Doping of impurities may affect the Curie temperature (T$\sb{\rm c})$ associated with the ferroelectric phase transition in terms of lattice harmonicity and anharmonicity including the creation of the defect energy. Its role in the para-to-ferroelectric transition has been investigated on two prototypical perovskite ferroelectrics, PbTiO$\sb3$ and BaTiO$\sb3.$
In-situ x-ray diffuse-scattering technique has been applied to a PbTiO$\sb3$ single crystal containing $\sim$1 at.% of impurities. Tetragonal fluctuations heralding the ferroelectric phase were observed at temperatures considerably above T$\sb{\rm c}$ in the cubic paraelectric phase. The magnitude of this fluctuation continued to increase upon cooling and eventually caused the heterogeneous nucleation of the ferroelectric phase. Local atomic distortions caused by impurities apparently assist the transition.
Two BaTiO$\sb3$ single crystals with one containing 0.3 at.% Fe$\sp{3+},$ heterovalently substituted for Ti$\sp{4+}$, have been examined by in-situ x-ray thermal diffuse scattering (TDS) measurement near but above T$\sb{\rm c}$. By monitoring the Bragg peak, T$\sb{\rm c}$s were found to be 129.0$\sp\circ$ and 132.5$\sp\circ$ C on cooling and heating for the pure sample, and correspondingly, 127.2$\sp\circ$ and 128.8$\sp\circ$ C for the doped sample. Results from the pure sample show two-dimensional TDS distribution around the Bragg peaks on the $\{100\}$ relplane; they are attributed to the overdamped (010) $\sb{\rm TO}$ mode and to the anisotropic on-(100) TA modes. The TDS distribution and negative temperature dependence of the intensity near the zone center agree well with neutron inelastic scattering results in the literature.
The TDS distribution from the Fe-doped sample shows a similar pattern to that of the pure sample. However, some differences are found at small $\rm \vec q$; it displays positive temperature dependence of the intensity and shows more isotropic distribution. The heterovalent doping is believed to have changed the lattice anharmonicity.
The TDS intensity calculations at 200$\sp\circ$, 150$\sp\circ$, and 135$\sp\circ$ C have been carried out using the normal mode analysis based upon the rigid shell model under the harmonic approximation. The second-order TDS intensity is $\sim$10-17% of that of the first order TDS. The calculated results show good agreement with the observed data at $\vert{\vec\rm q}\vert > 0.25$ for the two samples. The anharmonic correction was made to the intensities near the zone center for the (010) $\sb{\rm TO}$ mode using the imaginary part of the response function; the damping coefficient was adjusted to fit the calculated data to the observed data. At the final refinement, the residue factor is $\sim$11.5% for the pure sample, and $\sim$9.3% for the doped sample. The damping constants are almost independent of temperature for the two samples. The damping constants of the pure sample are slightly larger than those of the doped sample. This implies that the heterovalence due to doping attenuates the anharmonicity. This effect can be understood using the hole-relaxation coupling concept.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.