Design and implementation of a multicast, input-buffered ATM switch for theiPOINT testbed
Lockwood, John William
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/22906
Description
Title
Design and implementation of a multicast, input-buffered ATM switch for theiPOINT testbed
Author(s)
Lockwood, John William
Issue Date
1996
Doctoral Committee Chair(s)
Kang, Sung Mo
Department of Study
Electrical and Computer Engineering
Discipline
Electrical and Computer Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Electronics and Electrical
Computer Science
Language
eng
Abstract
This thesis presents the design and implementation of the multicast, input-buffered Asynchronous Transfer Mode (ATM) switch for use with the iPOINT testbed. The input-buffered architecture of this switch is optimal in terms of the memory bandwidth required for the implementation of an ATM queue module. The contention resolution algorithm used by the iPOINT switch supports atomic multicast, enabling the simultaneous delivery of ATM cells to multiple output ports without the need for recirculation buffers, duplication of cells in memory, or multiple clock cycles to transfer a cell from an input queue module.
The implementation of the prototype switch is unique in that it was entirely constructed using Field Programmable Gate Array (FPGA) technology. A fully functional, five-port, 800 Mbps ATM switch has been developed and currently serves as the high-speed, optically interconnected, local area network for a cluster of Sun SPARCstations and the gateway to the wide-area Blanca/XUNET gigabit testbed. Through the use of FPGA technology, new hardware-based switching algorithms and functionality can be implemented without the need to modify hard-wired logic. Further, through the use of the remote switch manager, switch controller, and FPGA controller, the management, operation, and even logic functionality of the iPOINT testbed can be dynamically altered, all without the need for physical access to the iPOINT hardware.
"Based on the existing prototype switch, the design of the FPGA-based, gigabit-per-second ""Any-Queue"" module is presented. For this design in its maximum configuration, up to 256 queue modules can be supported, providing an aggregate throughput of 180 Gbps. Further, the design of a 16-port, 11.2 Gbps aggregate throughput, switch fabric is documented that can be entirely implemented using only eight FPGA devices."
In addition to the design of the switch module, this thesis describes the supporting components of the iPOINT testbed, including the network control and application software, the hardware specifications of the switch interface, and the device requirements of the optoelectronic computers used in the testbed
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
