The use of CPT for calculating axial capacity of drilled shafts
Alsamman, Omar Mohammed
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/22037
Description
Title
The use of CPT for calculating axial capacity of drilled shafts
Author(s)
Alsamman, Omar Mohammed
Issue Date
1995
Doctoral Committee Chair(s)
Long, James H.
Department of Study
Engineering, Civil
Discipline
Engineering, Civil
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Civil
Language
eng
Abstract
The use of drilled shafts has increased significantly in the last two decades due to their ability to carry large loads economically. Current methods for calculating axial capacity of drilled shafts rely heavily on static methods. The cone penetration test is a simple, fast, and economical test that provides a continuous measurement of in-situ soil resistance with depth. The objectives of this thesis are (1) to evaluate the cone penetrometer as an alternative for calculating axial capacity of drilled shafts, (2) to evaluate available CPT methods, and (3) to develop procedures that rely on CPT resistance to calculate side and tip capacity of drilled shafts. A database of 95 full-scale drilled shaft load tests has been collected for this study. The database consists of 48 load tests in cohesionless soils, 16 load tests in cohesive soils, and 31 load tests in mixed soils. Five cone methods are evaluated: Schmertmann method, modified Schmertmann method, LPC method, Meyerhof method, and Gwizdala method. The Reese and O'Neill method is also evaluated for shafts in cohesive soils (using current database), for shafts in cohesionless soils (using q$\sb{\rm c}$/N conversions), and in mixed soils (using Reese and O'Neill database). The influence of geometry (L/B ratio, diameter, length, expanded base), construction procedure, type of bearing layer, and cone type on predicted capacity has been assessed. The study resulted in improved CPT design procedures that correlate q$\sb{\rm c}$ of the cone to q$\sb{\rm b}$ and f$\sb{\rm s}$ of a drilled shaft. Design curves are given for mechanical and electric cones. The database was used to evaluate the proposed method and other design procedures studied. The average ratio of predicted to measured capacity Q$\sb{\rm p}$/Q$\sb{\rm m}$ for the proposed method was approximately equal to one for all soil categories. The scatter exhibited in prediction results was lower than that in other CPT methods analyzed. The proposed method predicted capacity with more accuracy (average Q$\sb{\rm p}$/Q$\sb{\rm m}$ closer to 1.0) but with similar scatter to Reese and O'Neill method for shafts in cohesive soils and shafts in mixed soils. For shafts in cohesionless soils, the proposed method predicted capacity closer to measured and exhibited less scatter than the Reese and O'Neill method.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
