Experimental and theoretical study of CW hydrogen fluoride chemical laser residual fundamental gain
Theodoropoulos, Panagiotis Theodoros
This item is only available for download by members of the University of Illinois community. Students, faculty, and staff at the U of I may log in with your NetID and password to view the item. If you are trying to access an Illinois-restricted dissertation or thesis, you can request a copy through your library's Inter-Library Loan office or purchase a copy directly from ProQuest.
Permalink
https://hdl.handle.net/2142/20805
Description
Title
Experimental and theoretical study of CW hydrogen fluoride chemical laser residual fundamental gain
Author(s)
Theodoropoulos, Panagiotis Theodoros
Issue Date
1992
Doctoral Committee Chair(s)
Sentman, Lee H.
Department of Study
Aerospace Engineering
Discipline
Aerospace Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
Ph.D.
Degree Level
Dissertation
Keyword(s)
Engineering, Aerospace
Language
eng
Abstract
A new technique that uses a multi-line probe beam to measure the gain on several lines simultaneously was developed. This new technique was used to measure the gains of the peak fundamental lines P$\sb1$ (4-9) and P$\sb2$(4-9) while lasing on the overtone, for three levels of media saturation. The suppression of the fundamental gains obtained at relatively high media saturation with 99.7/99.7% reflective mirrors was essentially the same as that obtained with 55% higher intracavity flux with 99.8/99.86% reflective mirrors. The gains of the low J lines P$\sb1$(4-6) and P$\sb2$(4-6) were suppressed 41% to 84%; the gains of the high J lines P$\sb1$(7-9) and P$\sb2$(7-9) were suppressed 3% to 43%. The 1 $\to$ 0 lines were suppressed more than the 2 $\to$ 1 lines. The maximum suppression occurred between 2 and 6 mm downstream from the nozzle exit plane, near the center of the 9 mm overtone beam.
Simulation of the experiments with a rotational nonequilibrium computer model showed that the fundamental gains are determined by three independent mechanisms when lasing occurs on the overtone. First, overtone lasing decreases the gains of the P$\sb1$(J) and P$\sb2$(J) lines whose upper or lower levels are directly involved in P$\sb{20}$(J) overtone lasing. Second, overtone lasing reduces the rate at which the low J v = 2 states are populated by rotational relaxation and increases the rate at which the low J v = 0 states are populated by rotational relaxation, resulting in suppression of the low J fundamental gains whose upper or lower levels are not directly involved in overtone lasing. Third, overtone lasing reduces the rate at which the HF(0,J) and HF(1,J) states are populated by the various collisional deactivation processes.
With 10% of the original rotational relaxation rate, the computer model was in reasonable agreement with the measured zero power gain profiles. The model over predicted the fundamental gain suppression ($\Delta\alpha$) for the P$\sb1$(8,9) and P$\sb2$(8,9) lines whose upper or lower levels were directly involved in overtone lasing, and under predicted the suppression for lines P$\sb1$(4) and P$\sb2$(4,5). The model predicted the suppression for lines P$\sb1$(5-7) and P$\sb2$(6,7) reasonably well. With the original rotational relaxation rate, the model was in reasonable agreement with the measured suppression of all P$\sb1$(4-9) and P$\sb2$(4-9) lines. However, with the original RR rate, the model's agreement with the experimental zero power gain profiles was not adequate.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
