Optimization of enhancements to aluminum-based structural energetic materials

Poirier, Nicholas

Permalink

https://hdl.handle.net/2142/101353 Copy

Description

Title

Optimization of enhancements to aluminum-based structural energetic materials

Author(s)

Poirier, Nicholas

Issue Date

2018-04-26

Director of Research (if dissertation) or Advisor (if thesis)

Glumac, Nick

Department of Study

Mechanical Sci & Engineering

Discipline

Mechanical Engineering

Degree Granting Institution

University of Illinois at Urbana-Champaign

Degree Name

M.S.

Degree Level

Thesis

Keyword(s)

• Aluminum
• Combustion
• Structural Energetic Material, Magnesium, Tungsten, Detonation, Case, Casing, Fragmentation

Abstract

Warhead casings are most often made of steel due to its low cost, high strength, good manufacturability, and ability to produce dense high-speed fragments. However, inert steel does not improve blast wave characteristics. In fact, it significantly reduces peak blast pressure and impulse as energy is expended in fracturing the case and accelerating the fragments. In applications where fragmentation is unnecessary or unwanted, warhead energy output can be improved by choosing a case material that reacts in the detonation environment. Aluminum is a good candidate for this application due to its low cost, widespread availability, good manufacturability, and high enthalpy of combustion. Difficulty arises in the timely ignition of the aluminum. A plain aluminum case produces mostly large fragments which do not burn on the timescale necessary for primary blast enhancement. Alloying other elements as well as incorporating changes to case geometry can enhance breakup to improve early time ignition. This research aims to optimize several parameters to maximize aluminum casing performance. Primary diagnostics consist of dynamic pressure measurements, quasi-static pressure measurements, and high speed imaging. Effect of wall material on fragment reaction is also investigated. Additionally, tensile test specimens are fabricated and tested to verify that structural properties of the aluminum are not compromised by the optimizations. Electron microscopy is used to examine case structure after the manufacturing, which was done here at the UIUC.

Graduation Semester

2018-05

Type of Resource

text

Permalink

http://hdl.handle.net/2142/101353

Copyright and License Information

Copyright 2018 Nicholas Poirier

Owning Collections