Ring oscillator based injection locked clock multiplier
Coombs, Daniel R
Loading…
Permalink
https://hdl.handle.net/2142/97744
Description
Title
Ring oscillator based injection locked clock multiplier
Author(s)
Coombs, Daniel R
Issue Date
2017-04-24
Director of Research (if dissertation) or Advisor (if thesis)
Hanumolu, Pavan K.
Department of Study
Electrical & Computer Eng
Discipline
Electrical & Computer Engr
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
M.S.
Degree Level
Thesis
Keyword(s)
Phase-locked loop
Injection locking
Ring oscillator
High-performance clocking
Abstract
This thesis describes a ring-based injection locked clock multiplier (ILCM) designed with the goal of generating a high-frequency and low-jitter clock. Building on prior research done on injection locking, this design uses a reference frequency doubling technique to push the noise bandwidth of the circuit to Fref/3 to suppress DCO noise to a large extent. A background duty cycle error correction technique is employed to correct errors on the doubled clock that could be detrimental to performance. The design also modifies an existing architecture to achieve type-II suppression of DCO noise in order to fully suppress the flicker noise which becomes prevalent in low process nodes. The prototype ILCM was fabricated in TSMC 65 nm CMOS technology. Thorough testing was performed to characterize the effectiveness of the aforementioned techniques. The circuit achieves 340 fsrms integrated jitter when operating at 5 GHz while only consuming 5.3 mW of power. The ILCM's figure of merit, -242.4 dB, is on par with state-of-the-art ring-based clock multipliers while operating at a much higher output frequency and multiplication factor than previously published work. These results indicate the effectiveness of reference frequency doubling in a ring-based, high-performance clock multiplier design.
Use this login method if you
don't
have an
@illinois.edu
email address.
(Oops, I do have one)
IDEALS migrated to a new platform on June 23, 2022. If you created
your account prior to this date, you will have to reset your password
using the forgot-password link below.
