University of Illinois Urbana-Champaign

Design, setup of an optically accessible internal combustion engine for study of gasoline direct injection combustion

Donahue, Robert Michael

Content Files
DONAHUE-THESIS-2017.pdf

Permalink

https://hdl.handle.net/2142/97486

Description

Title
Design, setup of an optically accessible internal combustion engine for study of gasoline direct injection combustion
Author(s)
Donahue, Robert Michael
Issue Date
2017-04-26
Director of Research (if dissertation) or Advisor (if thesis)
Lee, Chia-fon F.
Department of Study
Mechanical Sci & Engineering
Discipline
Mechanical Engineering
Degree Granting Institution
University of Illinois at Urbana-Champaign
Degree Name
M.S.
Degree Level
Thesis
Date of Ingest
2017-08-10T19:16:12Z
Keyword(s)
  • Gasoline direct injection
  • Optical engine
  • High-speed imaging
  • Mie scattering
  • Natural luminosity
Abstract
Gasoline direct injection (GDI) engines are becoming attractive options for automobiles. The precise control over fuel delivery increases the potential for better fuel efficiency and higher performance. In this study, a single-cylinder optically-accessible engine was built to visualize GDI combustion. The optical engine was originally designed and used as a compression ignition engine for study of diesel combustion, but was extensively modified for GDI. The cylinder head was modified to include a spark plug, and a new ignition system was designed. In addition, a lowered compression ratio, new piston geometry, and new fuel injector were employed. In the experiment, combustion of a 20 percent ethanol/80 percent pure 90-octane gasoline fuel blend was studied. Experiments were conducted at 1200 rpm, and intake air and fuel were independently controlled. A metal version of the optical piston was made, and preliminary tests were conducted using the metal configuration. From these tests, engine performance, stability, and emissions were measured. Following the metal engine testing, an optical study was performed. Using a high-speed camera at 12,000 frames per second, images of fuel injector spray as well as combustion were recorded. A 3-dimensional Mie scattering technique was used to image the interaction of the fuel spray with the piston and cylinder walls, and natural flame luminosity was used to capture combustion images. From the experiments, it was concluded that in this configuration, a double injection with a first injection timing of 180° BTDC and a 90 percent/10 percent first/second injection split gave the best results with respect to engine stability and emissions. The combustion and spray imaging paired with corresponding performance and emissions data provide a broad picture of GDI combustion characteristics.
Graduation Semester
2017-05
Type of Resource
text
Permalink
http://hdl.handle.net/2142/97486
Copyright and License Information
Copyright 2017 Robert M. Donahue

Owning Collections

Graduate Dissertations and Theses at Illinois PRIMARY
Graduate Theses and Dissertations at Illinois
Dissertations and Theses - Mechanical Science and Engineering